On 1st, 3rd and 4th of July, we had our exhibition in the Grote Kerk on the Oude Markt. In the church, you can find our flower and our pedestal. Apart from our installation, there are also 12 other installations you can try.
Our flower was a big hit because it’s easy to use and accessible for everyone. Because it’s standing in the middle of the church its one of the first things they see and they get curious.
Monday there was a ceremony where they announced the winner and we won! That was a big surprise and we were really happy! Our hard work paid off!
Eva and i finished the building part and started the next day (it was a saturday) with the first and second layer of white to cover the wood.
after the 2 layers of white we had to wait 24 hours to let it completely dry and started monday with buying the good paint, not the action paint. After everything we needed we started taping the triangles on the stam.
Continue reading “Painting Stem Flower”
on friday 23-06 we started buidlding our main flower. We asked help from the expert Rob Dekker. We used his space to build the flower.
First Eva and i had to buy all the wood and stuff for the building part. And at the end we didn’t use all the wood we got but 3 from the 4 pieces of wood. The sizes where: 244 – 12 cm.
So we decides to use the whole height (2.44 m) as the top height of the flower and work from the bottom till top. As our direction we used Eva’s 3D sketch. The picture below is without sized because we had to adapt them.
Continue reading “Building Main flower.”
We changes our design concept from a hexagon to a square.
The reason why we changed it is because i talked to a professional and said that the shape of hexagon is a lot more work then a square. And because we wanted his help he said that the square is the fastest and the more strong build then the hexagon one.
This is because the square one is made from one peice of wood. And the hexagon is from all lose ends. This way the wood is “damaged” because you have to cut it and it loses his strength.
So this is the reason why we changed from a hexagon shape to a square one.
After the talk with the professional we thouht about why we wanted a hexagon and no one had a good reason why. The only reason is that we thought it looked cool.
We discussed further and made a 3D object from the square one and we found out that it still would look really awesome.
The left picture is the old style in an hexagon. The right picture is the new style Square.
I have been busy with the flyers for the promotion.
The reason we wanted to have flyers is because it is a easy way to promote in the shops. We also can give it out to people on the busiest placed from Enschede to let them know of our installation and goals.
What we put on the flyers is the poster on the front and the social media sides to let them know we are online on the back with a QR-Code to out Website.
Also we did the flyers in different colours so that it will have someting different then all the other flyers.
this is the front and the back of the blue flyer.
We also have the colours pink-purple, and purple-purple.
After we painted it white and came up with the design I started putting on the tape. This was a bit of a pain in the ass but is not even the worst part…
After about 6 rolls of tape, I was finally done! But then the hard part began… We had to paint every single triangle in different colors. We mixed some colors and started painting. It took us a lot longer than we thought.
Continue reading “Low poly pedestal”